Easy-Laser® E970 - Parallelism
For parallelism measurement of rolls and other objects in numerous applications. The E970 is especially suitable when many objects are to be measured and aligned, and when the distances are long. Any chosen object or the baseline can be used as a reference.
Easy-Laser® E970 Parallelism system use the traditional method where a laser beam is pointed alongside the machine, and then deflected 90 degrees towards the measurement object by a penta prism.
The prism is moved along the beam, which is deflected to each roll that is to be measured, and maybe aligned. Both ends of the roll are measured, and you get an angular value which is compared to the reference line (base line) or a reference roll. Besides paper machines, printing machines and rolling mills you can also measure and align rails, overhead tracks, metal sheet cutters and many other types of machines.
The E970 is especially suitable when many objects are to be measured and aligned, and when measuring over a long distance. The maximum distance with a standard system is 80 metres, the number of measurement objects can be several hundred, but is more likely limited by other practical factors than the system software! The alignment of the rolls can be performed in live mode with instant feedback. You can add, remove and remeasure objects any time during measurement. The result is displayed both graphically and digitally in a table, and a PDF report can be produced directly on-site. Then transfer the results to your PC and the data base software EasyLink™ (included).
Easy-Laser® E970 is not only limited to parallelism measurement. You can also use the system to measure level, straightness and flatness on wire sections (suction boxes), flatness on foundations and straightness of rolls. With a few accessories you can also do shaft alignment. This makes the E970 a very cost effective solution for your maintenance department.
The featured programs below are the most common used with this system. Please click here for a complete overview of possibilities.
For parallelism measurement of rolls, rails, overhead tracks, gantries, metal sheet cutters, production lines, etc. Two methods are available: measurement with Angular prism or with Angle detector E2.
With our program for measuring straightness, you can easily measure long shafts, rolls, bearings, bases, machine structures etc. All you have to do is define a number of measuring points, in advance or while measuring. You will be able to get the result for both the horizontal and vertical alignment, graphically as well as digitally.
Program to measure flatness/twist of (for example) machine bases, machine tables, etc. With advanced "best-fit" calculations.
For measurement of squareness in machines and installations.
An advanced electronic filter function can be used to achieve reliable results even under poor measuring conditions. Air turbulence and vibrations from adjacent machines are no match for the Easy-Laser® filter function!
Save measurement files as templates, with machine data and settings, to quickly start measurements.
The software is available in 14 languages: English, German, French, Spanish, Italian, Dutch, Polish, Russian, Swedish, Finnish, Brazilian Portugese, Japanese, Korean, Chinese (traditional and simplified).
With the EasyLink™ database program you can save and organise all your measurements in one place, produce reports with both data and images and export to your maintenance systems. You can customise what your Excel reports should look like and what data should be visible and where it should be positioned. The program has a clear folder structure, where you drag and drop files from the display unit to the database. Create your own structure with folders for manufacturer, department or machine type for example. The database can also be located on a common server and shared with other users. For extra safety you can use EasyLink™ to make backups of what you have saved in the display unit.
Save your files to USB and copy to other devices.
Save all measurements in the display unit’s internal memory.
When measurement is complete it is possible to generate a PDF report containing graphs and measurement data. All the information about the measurement object is documented, and you can add your company’s logo and address details if you so wish.
Quickly print all measurement data locally with a thermal printer (accessory).
The display unit for the E series enables you to work more efficiently and for longer than ever before thanks to several innovative solutions. It is also ergonomically designed with easy-to-grip rubber cladding and robust construction.
The display unit is equipped with our Endurio™ Power management system. This ensures that you never have to stop in the middle of a measurement because the battery has run out.
The display unit has a thin, easy-to-grip and rubber coated profile that ensures a secure grip. It has large well-spaced buttons that give clear feedback when pushed. In addition, the two Enter buttons make the system suitable for both right and left-handed users. The display screen has clear graphics that guide you through the measurement process.
You can create a user profile where you can save your personal settings. You can also have different settings for different types of measurements. It makes work faster!
You can choose the language that you want to appear on screen. English, German, French, Spanish, Portuguese, Swedish, Finnish, Russian, Polish, Dutch, Italian, Japanese, Korean and Chinese are available.
If you wish to expand functionality in the future, the software in the display unit can be upgraded via the internet or by connecting a USB memory containing the new software. In this way you will also have access to the measurement programmes that we develop for new purposes in the future.
System E970 comes with a 2 axis wireless positional detector (E7) placed on the roll with a sliding bracket with rotatable head. The bracket is kept in place with heavy duty, spring loaded magnets. For small roll diameters (< Diameter 85 mm [3.3"]) the included magnet base with rotatable head is used instead.
For installation, setting up and maintenance of precision machines, leveling of machine tables, rolls, etc – basically anything you can think of! Built-in rechargeable battery. OLED display with digital and graphical representation of angles. Connects wirelessly to display unit E51 for more functionality. Resolution 0.01 mm/m (0.001°). Measurement range ± 2 mm/m.
The angular prism (penta prism) deflects the laser beam exactly 90°. With the rotatable angular prism you can reach the detector almost anywhere on the machine.
Laser transmitter D22 can be used to measure flatness, straightness, squareness, level and parallelism. The laser beam can sweep 360° with a measurement distance of up to 40 metres [130´] in radius. The laser beam can be angled 90° to the sweep, within 0.01 mm/m [0.01 mils/inch].
The transmitter has many mounting options. Attach it with the three magnetic feet, horizontally or vertically. Attach it with a pin in the spindle. Or put it beside the machine on for example a tripod (optional).
Tripod for use with angular prism D46 and laser transmitter D22. The height of the tripod can be adjusted between 500 and 2730 mm.
For software, see Support > Software download.
The Easy-Laser® E980 Sawmill system will help you increase efficiency and save money in your sawmill. The system measures straightness, flatness and squareness. Equally useful on band saws and circular saws.
With the Easy-Laser® E290 Digital precision level you get new possibilities for aligning your machinery. Use it as a separate tool, or add it to your laser system.
Easy-Laser® E910 Flange is a system used to measure flange flatness of windmill towers, wings and hubs, tower bases, etc. It can also be used for parallelism measurement.
Easy-Laser® E915 is a system used to measure flange flatness of windmill towers and slewing bearings with an easy-to-use rotating laser.
Easy-Laser® E920 can be used to carry out all the most common geometric measurements; straightness, flatness, squareness, plumb and level. Measurement is quick and precise.
Easy-Laser® E930 is designed to measure straightness and pointing direction, primarily on extruder pipes. Another application can be e.g. hydraulic pipes.
Easy-Laser® E950 makes checking and aligning bearings and bearing journals easy. All of the parts included in the systems are designed and built for even the most demanding workplace and for easy setup on any machinery.
Easy-Laser® E960 Turbine alignment systems make the measurement and adjustment work of diapraghms and bearings easier thanks to the wireless detector unit and measurement programs that guides you through the measurement process.
For parallelism measurement of rolls and other objects in numerous applications. The E970 is especially suitable when many objects are to be measured and aligned, and when the distances are long.
Easy-Laser® E975 Roll alignment is designed for replacement and alignment of rolls in, for example, printing presses, paper machines and converting machines.